Replacement period

●Installation:

a) Drain or suck up old engine oil

b) Loosen the fixing screws and remove the old oil filter

c) Apply a layer of oil on the sealing ring of the new oil filter

d) Install the new oil filter and tighten the fixing screws

●Recommended replacement cycle: cars and commercial vehicles are replaced every six months

Automotive requirements for oil filters

Filter precision, filter out all particles> 30 um,

Reduce particles that enter the lubrication gap and cause wear (< 3 um-30 um)

The oil flow rate corresponds to the engine oil demand.

Long replacement cycle, at least longer than the oil life (km, time)

The filtering accuracy meets the requirements of protecting the engine and reducing wear.

Large ash capacity, suitable for harsh environments.

It can adapt to higher oil temperature and corrosive environment.

When filtering the oil, the lower the pressure difference, the better, to ensure that the oil can pass smoothly.

【 Go Back 】 | 【 Print 】